SKU:
emergency lighting in high-risk task areas, suspended module with built-in battery for LED high bay luminaires.
The Suspended Plug-in Emergency Module for LED High Bay is a device designed for use with high bay luminaires that have integrated LEDs and separate non-isolated LED drivers. It can be suspended with a luminaire to provide backup power in the event of a power cut. The emergency module requires a permanent live un-switched supply to maintain the battery charge. In the event of a power outage, the battery will supply the integrated LEDs at a reduced output.
This emergency module is suitable for use in luminaires for high-risk task area lighting and is designed for LED modules with a forward voltage of 30-270Vdc. It is compatible with both maintained and non-maintained emergency lighting systems and conforms to EN 61347-1 and EN 61347-2-7 and EN 61347-2-13.
The device is wired between the LED module and LED driver via a water-proof connector and has a voltage change-over threshold according to EN 60598-2-22. It has a 3-hour rated duration and is equipped with a built-in non-replaceable Li-Ion battery pack. The battery is protected from over-charge, over-current, short-circuit, and deep discharge. The device also features a green charging status LED, a test button for a quick functional test, and an ON/OFF button for the battery pack. It is intended for independent use.
| Output Wattage | 8W |
| Emergency Operation Time | 3.0hours |
| Input Voltage | 220-240Vac 50-60Hz |
| LED Qty/ Current | 40mA |
| Output Voltage | 30-270Vdc |
| Output Current | 20-130mA |
| Open Circuit Voltage | 280Vdc |
| Maximum Working Voltage | 280Vdc |
| Protection | IP65, Class I, Independent Driver |
